Frequently Asked Questions |
Q: What makes the MCM different in the way it monitors than the other leading signature or current analysis products?A: Almost all the leading systems use motor signature analysis which incorporates current signatures and votlage signatures. The difference is the MCM system uses patented technology call modeling or Model Based Condition Monitoring Technology. It actually learns the dynamics of the operating systems and models it. Then it compares the model against the actual operating system. |
Q: What does the MCM system tell you about your electric motor system?A: The MCM informs the user about the entire motor's operating system, incoming power including invertor drives if available, motor performance or motor issues and conditions occurring from the what the electric motor is driving, such as pumps, fans, gearboxes, misalignment, bearings, etc. It will also indicate whether the corrective action taken solved the problem or created additonal problems. |
Q: How many parameters does the MCM monitor?A: The MCM monitors 12 mechanical parameters, 8 electrical parameters including harmonics, physical data on the motor and overall summary of status via alerts, plus advanced diagnostics. |
Q: What type of software does the system use?A: MCM Scada software is Windows based Scada system that will operate with TCPIP platforms seamlessly. |
Q: How do we activate the MCMScada Software?A: You must contact us by phone or by e-mail for the activation codes for MCMScada Software. |
Please submit your questions below and if we cannot answer them, we'll find somebody who can! |
Motor Diagnostic Systems, Inc
www.mdsusa.net sales.support@mdsusa.net
Sales: (970) 461-1348 or (877) 461-1348 Fax: (866) 223-0800
Loveland, CO / Atlanta, GA / Knoxville, TN |